VantagePoint

ClarkDietrich Drift Head-of-wall clips are used in deflection conditions for in-fill curtain wall assemblies and/or interior nonload-bearing partitions to provide for both vertical (deflection) and lateral (drift) movement. These clips are used in place of, or in combination with, deflection track.
ClarkDietrich’s UXRC6-HD 68mils (14ga) rigid framing clip is used to attach exterior wall studs to the structure of the building. This clip is ideal for all medium and large standoff conditions and designed to resist horizontal and vertical loads. (1) 9/16" hole in the short leg of the clip allows...
33mil (20 Gauge) Lateral Bracing Clip used to secure 3/4" U-Channel to drywall studs The ClarkDietrich CC33 clip is used to secure U-Channel or Cold Rolled Channel (CRC) to non-structural wall studs. The wall stud friction fit design allows for as little as one screw for the connection to the U-...
Used to secure U-Channel or Cold Rolled Channel (CRC) to structural wall studs when used in load-bearing or curtain wall applications. The wall stud friction fit design allows for as little as one screw for the connection to the U-Channel.
33mil, 43mil or 54mil Fire Blocking System ClarkDietrich’s Fire Blocking is specifically designed to meet the requirement of horizontal fire blocking inside the wall system and between floor levels. Fire Blocking system simply installs by twisting into stud flanges and screwing into stud webs. The...
Floor joists connection to structural steel beams or CFS headers The Universal Joist Hangers (UJH) 68mils (14ga) or 97mils (12ga) are used to connect joists to CFS headers (with screws, welds or PAF fasteners) and steel I-beams (with welds or PAF fasteners). The UJH is sized to fit joist sizes...
ClarkDietrich Custom Aluminum Burn Clips are used as part of the ClarkDietrich H-Stud Area Separation Wall assembly and used for 3-hour design assemblies.
VERTICAL BUILDING MOVEMENT UP TO 3" ClarkDietrich FCSC-HD 68mils (14ga) is used to attach exterior curtain-wall studs to the building concrete structure and provide for vertical building movement independent of the cold-formed steel framing.
Vertical and lateral building movement up to 2" ClarkDietrich Drift FastClip™ Slide Clip 68mils (14ga) is used to attach exterior curtain-wall studs to the building structure and provide for both vertical and lateral movement.
A self-furring expanded V-grooved stainless steel metal lath, ideal for interior and exterior use over sheathing, masonry and other solid surfaces as required per ASTM C1063. Used for Plaster/Stucco/Drainage/Base
A superior multi-purpose stainless steel expanded mesh lath base widely used for exterior plaster and stucco reinforcement. The flat surface is easily cut and formed for use with flat or contoured surfaces.